AVALANCHES CAN ONLY OCCUR WHEN /IF THE SNOWPACK IS UNSTABLE.

The snowpack accumulates layer by layer throughout the winter with each new precipitation, temperature and wind event. There are both strong and weak layers within a snowpack. Strong layers tend to be denser layers comprised of small round snow grains that are packed closely together and are well bonded to each other or cohesive. Weak layers tend to be less dense layers that are comprised of poorly bonded or cohesionless grains. These layers often appear loose or "sugary". Because weak layers prevent strong layers from bonding with one another, it is important for the backcountry traveler to know the relationship of these layers.

      Sometimes it is helpful to think of the strong layer as a brick and the weak layer as potato chips. When the potato chips are on top of the brick there is no problem, but reverse the order and put the brick on top of the potato chips and you have a problem. The weak layer, potato chips, may not be able to support the strong layer, brick, and if the slope is steep enough an avalanche could occur. More importantly, sometimes the potato chips are just barely holding up the brick and all it takes is a skier or snowboarder adding their weight to an already stressed snowpack to trigger an avalanche.

      The snowpack exists in a balance between stress and strength. When the snow is stable the strength is greater than the stress. Fortunately, this is most often the case otherwise snow would never stay on a hillside. But sometimes the balance between stress and strength is almost equal and we have an unstable snowpack. Add additional stress such as a rapid load of percipitation, a sudden increase in temperature, wind blown snow or a human and an avalanche could be triggered.

      To travel safely in the backcountry you must be able to recognize unstable snow, so come along on our day in the backcountry and we will teach you how to observe and test the stability of the snowpack.